05-28-2019, 12:05 PM
Aerospace Engineering-AE Question paper and answer key can be downloaded from the links given below
Some sample questions from the paper
1. To simulate the aerodynamic forces on a cylinder of 1 m diameter due to a uniform air flow of 1 m/s at standard temperature and pressure (STP), low-speed wind tunnel experiments at STP are conducted on a 0.1 m diameter cylinder. The free stream air speed in the wind tunnel experiments should be______m/s {round off to the nearest integer).
2. The power-off glide range for an airplane with a maximum Lift to Drag ratio of 18, when the glide starts at an altitude of 4 km, is_km {round off to the nearest integer).
3. For an airplane flying in a vertical plane, the angle of attack is 3°, the horizontal and vertical components of velocity in wind axis are 300 km/h and 15.72 km/h, respectively. The pitch attitude of the airplane is_________degrees {round off to 2 decimal places).
Some sample questions from the paper
1. To simulate the aerodynamic forces on a cylinder of 1 m diameter due to a uniform air flow of 1 m/s at standard temperature and pressure (STP), low-speed wind tunnel experiments at STP are conducted on a 0.1 m diameter cylinder. The free stream air speed in the wind tunnel experiments should be______m/s {round off to the nearest integer).
2. The power-off glide range for an airplane with a maximum Lift to Drag ratio of 18, when the glide starts at an altitude of 4 km, is_km {round off to the nearest integer).
3. For an airplane flying in a vertical plane, the angle of attack is 3°, the horizontal and vertical components of velocity in wind axis are 300 km/h and 15.72 km/h, respectively. The pitch attitude of the airplane is_________degrees {round off to 2 decimal places).